Ready to upgrade your driveway?
Speak directly to our team for honest advice and a free, no-obligation quote.
Professional tarmac driveway installation, asphalt resurfacing and surfacing repairs throughout Dorking and surrounding Surrey areas. Easy Group provides durable surfaces for residential driveways, private entrances, access areas and suitable larger projects, with resin bound, block paving and tar & chip alternatives also available.
Tarmac is a practical choice for driveways and access areas where a smooth, hard-wearing surface is required. It can work particularly well for both normal residential driveways and larger entrances where a simple, durable finish is preferred.
Easy Group provides tarmac and asphalt surfacing throughout Dorking, covering new driveway construction, resurfacing, repairs and suitable larger access areas.
Before work begins, we assess the condition of the existing surface, ground beneath it, drainage, levels and how the area will be used. These factors help determine the preparation required before the finished tarmac is installed.
Where a more decorative or textured appearance is preferred, we can also discuss resin bound surfacing, block paving and tar & chip surface dressing.
A new tarmac driveway can provide a clean and practical entrance to a property without requiring the more detailed patterning associated with block paving. Once the site has been correctly prepared, the finished surface provides a straightforward area for regular vehicle use.
The visible tarmac is only the final stage of the installation. The strength and stability of the driveway depend substantially on the preparation beneath it.
Where a completely new driveway is being constructed, unsuitable material may need to be excavated before an appropriate sub-base is installed and compacted.
The amount of preparation required varies according to existing ground conditions, previous surfacing and the expected use of the driveway. For this reason, the site is assessed before the construction method is agreed.
Edging helps define the finished surface and can also form part of the driveway design. Suitable kerbs may be used, while contrasting block paving can create a more decorative border around the darker tarmac.
Entrance details, curves, existing paths and transitions around the property can also be considered so that the completed driveway works with the surrounding area.
An older tarmac or asphalt area may become faded, worn or locally damaged while much of the underlying construction remains usable. In those circumstances, resurfacing may sometimes be more appropriate than complete reconstruction.
However, new surfacing should not simply be used to hide significant movement, severe cracking or drainage problems underneath.
We inspect the existing area first and can advise whether repair, resurfacing or more substantial preparation is appropriate.
Not every surfacing project is a short residential driveway. Longer entrances and larger access areas can require particular attention to levels, drainage, ground preparation and expected vehicle use.
Tarmac and asphalt can provide an effective solution for suitable larger areas, while tar & chip surface dressing may offer an alternative where a more textured appearance is preferred.
Damage to a driveway can occur for several reasons. Surface wear may be relatively straightforward, while cracking, sinking or repeated movement can indicate a problem within the construction beneath the visible tarmac.
The repair method therefore depends on both the appearance of the damage and what is happening underneath it.
Where deterioration is limited to a particular area, it may be possible to prepare and repair that section independently rather than replacing the complete driveway.
The surrounding surface and underlying material need to be assessed first so that the repair method is appropriate for the condition of the area.
A depression or sunken section can sometimes indicate movement below the finished surface. Simply filling the visible low area without addressing the cause may not provide a satisfactory long-term result.
Where necessary, affected material can be removed and the underlying area prepared before the surface is reinstated.
Each site is different, but a properly planned driveway normally progresses through four main stages.
We assess the driveway, access, ground conditions, levels and intended use.
Excavation and sub-base preparation are completed where required.
Water management, levels, kerbs and borders are considered before surfacing.
The agreed tarmac or asphalt specification is installed and professionally finished.
Tarmac is not right for every project. Resin bound surfacing, block paving and tar & chip all provide different appearances and practical characteristics.
Resin bound surfacing combines natural stone aggregate and specialist resin to form a smooth decorative surface without loose stone on top.
Different aggregate blends are available and permeable systems can be created where the complete base construction is suitable.
Resin Driveways →Block paving allows different colours, patterns and borders to be used to create a more detailed driveway design.
It can be installed as a complete driveway or used as contrasting edging around a tarmac surface.
Block Paving →Tar and chip creates a more textured, natural-looking surface and can be worth considering for suitable longer driveways, entrances and private access areas.
The condition of the existing base needs to be assessed before surface dressing is recommended.
Surface Dressing →Both surfaces can work well for appropriate driveways, but they provide quite different finished appearances.
Tarmac provides a smoother and more uniform finished surface and can work particularly well for driveways, parking areas and entrances where a neat, straightforward appearance is preferred.
Tar and chip uses stone aggregate to provide a more textured appearance. For suitable longer driveways or private entrances, this can create a finish that feels less formal than conventional black tarmac.
Easy Group provides new tarmac driveways, asphalt resurfacing and repairs throughout Dorking and surrounding Surrey areas.
If you have an existing driveway that needs resurfacing or are planning a completely new entrance or access area, arrange a free site survey and we can assess the available options.
Yes. Easy Group installs new tarmac driveways throughout Dorking and surrounding Surrey areas, including the preparation and associated groundwork required for suitable projects.
Potentially. The existing surface and underlying construction need to be inspected first. Where the base remains stable and suitable, resurfacing may be possible.
The affected area can be assessed to establish whether the problem is limited to the surface or whether movement beneath it also needs to be addressed before the driveway is repaired.
Yes. Suitable longer entrances and access areas can be assessed for tarmac, asphalt or alternative surfacing depending on their existing construction and expected use.
It can be suitable for some private driveways and access areas, particularly where a more textured finish is preferred. The existing surface should be assessed first.
Yes. Easy Group also provides resin bound surfacing and block paving alongside tarmac and tar & chip surface dressing.
Yes. We provide free site surveys and no-obligation quotations for new driveways, resurfacing, repairs and suitable larger surfacing work.
Need a new tarmac driveway, asphalt resurfacing or repairs? Speak directly to Easy Group about your Dorking project and arrange a free site survey and no-obligation quotation.
Professional tarmac driveway installation, asphalt resurfacing and driveway repairs throughout Esher and surrounding Surrey areas. Easy Group provides complete driveway solutions including preparation, drainage, edging and finishing details, together with resin bound, block paving and surface dressing alternatives.
A well-finished driveway should work with the entrance and appearance of the property while also providing a practical surface capable of handling regular vehicle use.
Easy Group installs and resurfaces tarmac driveways throughout Esher, providing everything from completely new driveway construction to repairs and resurfacing of suitable existing areas.
We assess the existing ground, drainage, levels and base before deciding what preparation is required. This is important because the long-term performance of the finished tarmac depends heavily on the construction beneath it.
Where appropriate, tarmac can also be combined with decorative block paving, kerbing and edging to create a more defined and individual driveway entrance.
Tarmac provides a smooth and relatively understated driveway finish that can suit both traditional and contemporary properties. It is practical for regular vehicle use and can be adapted to a wide range of driveway shapes and entrance layouts.
A new installation begins with assessment of the existing site. Where necessary, older material is removed and the area excavated to allow a suitable sub-base to be constructed and compacted beneath the finished surface.
The quality of a new driveway depends considerably on the preparation beneath it. Weak or unsuitable ground, insufficient base construction or unresolved drainage problems can all affect the finished surface.
For this reason, we assess each property before recommending the required construction rather than treating every driveway in exactly the same way.
Tarmac can be combined with contrasting paving to create a more detailed finish around the entrance. Block paved borders can define the driveway, highlight curves or edges and provide contrast against the darker tarmac surface.
Kerbs, entrance details and transitions to existing paths or paving can also be considered as part of the overall driveway design.
An older driveway may not always need to be completely rebuilt. Where the existing construction remains stable and suitable, resurfacing can sometimes provide an effective way to renew the appearance and surface.
Before resurfacing is recommended, the existing driveway needs to be checked for significant cracking, movement, weak areas and drainage problems.
If deterioration originates below the surface, additional preparation may be necessary first rather than simply covering the existing problem.
Driveways can deteriorate for different reasons. Localised damage may develop through repeated vehicle loading, weathering or wear, while larger areas of cracking or sinking can indicate movement within the construction beneath the surface.
We assess damaged areas before recommending the repair method so the work can be matched to the type and extent of deterioration.
Where damage is limited to a specific section, it may be possible to prepare and repair that area rather than replacing the entire driveway. The affected material and condition of the base are considered first.
Where the driveway is generally stable but the visible surface has become worn over a wider area, resurfacing may produce a more consistent finish than carrying out numerous individual patch repairs.
For more substantial failure, sections of the driveway may need reconstruction before the final surfacing work is completed.
Although tarmac itself provides a simple smooth finish, surrounding details can make a considerable difference to the overall appearance of the driveway and entrance.
Borders, edging, steps and transitions can be considered as part of the project so that the finished driveway works with the surrounding property.
The exact preparation varies from site to site, but the project follows a structured process from initial assessment through to the completed driveway.
The existing driveway, levels, access and ground conditions are assessed.
Excavation, sub-base and repairs are completed where required.
Water management, kerbs, paving borders and levels are addressed.
The agreed tarmac or asphalt surface is installed and professionally finished.
Tarmac is not the only option available. Depending on the style of the property and preferred finish, resin bound surfacing, block paving or tar & chip may also be suitable.
Resin bound surfacing combines natural stone aggregate with specialist resin to create a smooth decorative surface with no loose gravel on top.
Different aggregate colours and blends are available and permeable systems can be created where the complete base construction is suitable.
Resin Driveways →Block paving allows greater flexibility in colour, pattern and design and can be used for complete driveways or simply as contrasting borders around a tarmac surface.
Suitable base preparation and edge restraint remain important to the stability of the finished paving.
Block Paving →Tar and chip surface dressing provides a more textured appearance and can be appropriate for suitable larger driveways, private entrances and access routes.
The condition of the existing surface needs to be assessed before this type of finish is recommended.
Surface Dressing →The right answer depends on the condition of the driveway beneath the visible surface.
Where the underlying driveway remains stable and the main issue is surface wear, resurfacing may provide a practical way to renew the area without unnecessary complete reconstruction.
Widespread cracking, movement, repeated sinking or drainage problems can indicate that sections beneath the surface need attention before a reliable new driveway finish can be installed.
Easy Group provides new tarmac driveway installation, asphalt resurfacing and repairs throughout Esher and surrounding areas.
Whether you are replacing an older driveway or considering a completely new surface, we can survey the area and discuss tarmac, resin, block paving and other suitable options.
Yes. Easy Group installs new tarmac driveways throughout Esher and surrounding Surrey areas, including the preparation and associated groundwork required for the project.
Potentially. The existing construction needs to be assessed first. Where the base remains stable and suitable, resurfacing may be possible.
Yes. Damaged areas can be assessed to determine whether localised repair, resurfacing or more extensive preparation is required.
Yes. Block paving can be used as contrasting edging or borders around a tarmac driveway where appropriate to the design and construction.
Yes. Alongside tarmac surfacing, Easy Group provides resin bound driveways, block paving and tar & chip surface dressing for suitable properties.
Where required, projects can include excavation, sub-base preparation, drainage, edging and kerbing before the final surface is installed.
Yes. We provide free site surveys and no-obligation quotations for new driveways, resurfacing and suitable repair work.
Planning a new driveway or considering resurfacing an existing one? Speak directly to Easy Group about your Esher property and arrange a free site survey and no-obligation quotation.
Professional tarmac driveway installation, asphalt surfacing, resurfacing and repairs throughout Weybridge and surrounding Surrey. Easy Group provides complete surfacing solutions for residential driveways, entrances, private access areas and suitable commercial projects.
Tarmac is one of the most practical choices for driveways and access areas where a smooth, hard-wearing finished surface is required. However, the quality of a tarmac installation depends on much more than the final layer visible at the surface.
Easy Group provides tarmac and asphalt surfacing throughout Weybridge, including completely new driveways, replacement surfaces, resurfacing and suitable repair work.
Our team can assess the existing driveway, ground conditions, drainage and levels before advising whether the area requires complete reconstruction or whether an existing suitable surface can be repaired or resurfaced.
We also provide resin bound surfacing, block paving and tar & chip surface dressing where a different finish is better suited to the property or project.
A properly constructed tarmac driveway provides a clean, understated finish that works with a wide range of properties. It is particularly suited to driveways that need to cope with regular vehicle movements without requiring an overly decorative surface.
For new installations, the existing ground is inspected before work begins. Where necessary, unsuitable material is excavated and a suitable sub-base is installed and compacted before the tarmac layers are laid.
Creating a new driveway involves more than delivering and rolling tarmac. The preparation beneath the surface needs to provide suitable support for the expected use of the driveway.
Levels, drainage and edging also need to be considered so that the finished area works with the entrance, surrounding paving, gates, walls and other features around the property.
Tarmac does not have to produce a completely plain entrance. Contrasting block paved borders and suitable kerbs can be incorporated to define the driveway and create a more detailed finish.
This can work particularly well where the simplicity and durability of tarmac are preferred but the entrance would benefit from a stronger visual border.
A worn driveway does not automatically need to be completely excavated and reconstructed. Where the existing base and surface remain suitable, resurfacing may provide an effective way of renewing the area.
The existing driveway needs to be assessed first. Severe cracking, movement, drainage problems or failure beneath the surface may require additional preparation rather than simply covering the problem.
We can inspect the existing area and advise whether resurfacing, repair or complete replacement is the more appropriate approach.
Cracks, worn sections, depressions and localised surface failure can develop for different reasons. Sometimes the problem is limited to the visible surfacing, while in other cases movement or weakness below the surface may also be involved.
For that reason, repair work should begin with an assessment of the affected area rather than simply placing new material over the damage.
Where deterioration is localised, the damaged section may be capable of being prepared and repaired independently from the rest of the driveway. The appropriate method depends on the size of the affected area and the condition of the material underneath it.
If a large proportion of the driveway has become worn while the underlying construction remains suitable, resurfacing may provide a more consistent finished appearance than carrying out numerous isolated repairs.
Where there is more substantial structural failure, additional groundwork or reconstruction can be required before the finished surface is renewed.
The exact work varies from property to property, but a properly planned driveway generally follows a clear sequence from assessment through to finished surfacing.
The existing surface, ground, access, levels and intended use are assessed.
Excavation and construction of the required sub-base are completed where necessary.
Finished levels, water management, kerbs and borders are addressed as required.
The agreed surfacing specification is installed and professionally finished.
The visible black surface is the final stage of the driveway rather than the whole construction. Suitable preparation below it helps provide the stability required for regular vehicle use.
This is why we assess the existing ground and base before deciding what work is necessary rather than applying the same construction method to every site.
Tarmac is the main focus of this page, but some properties are better suited to resin bound surfacing, block paving or tar & chip depending on the appearance and use required.
Resin bound surfacing combines natural aggregate with specialist resin to create a smooth decorative surface without loose gravel on top.
A range of aggregate colours and blends is available and permeable systems can be created where the full base construction is appropriate.
Resin Driveways →Block paving provides a wide choice of laying patterns, colours and border details and can be used to create either traditional or contemporary driveway designs.
It can also be combined with tarmac to produce contrasting borders around the main driveway surface.
Block Paving →Tar and chip surface dressing provides a more natural textured appearance and can be suitable for certain driveways, private access areas and larger surfaced entrances.
The existing base needs to be suitable, so the area should be inspected before surface dressing is recommended.
Surface Dressing →Easy Group undertakes both residential driveway work and suitable larger or commercial surfacing projects.
New tarmac driveways, resurfacing and repairs for residential properties, with resin bound, block paving and surface dressing alternatives available where another finish is more suitable.
Suitable commercial projects can include entrances, forecourts, parking areas and private access surfaces. Larger areas are assessed according to their expected vehicle use and existing construction before the surfacing specification is agreed.
One of the most important decisions with an older tarmac driveway is whether the existing construction is still suitable enough to retain.
Where the existing driveway remains stable and problems are mainly associated with the worn surface, resurfacing may provide an effective way to renew the area without unnecessary complete reconstruction.
If the driveway has substantial movement, repeated sinking, widespread cracking or drainage problems, sections of the existing construction may need rebuilding before a reliable new surface can be installed.
Easy Group provides tarmac driveway installation, asphalt resurfacing and repairs throughout Weybridge and surrounding areas.
Whether you need a completely new driveway or want us to assess an older surface, arrange a free site survey and we can discuss the most appropriate surfacing and preparation options.
Yes. Easy Group undertakes new tarmac driveway installations throughout Weybridge, including the preparation and associated groundwork required for the project.
Potentially. The existing surface and underlying construction need to be assessed first. Where the base remains suitable, resurfacing may be an option.
Yes. Damaged and worn areas can be assessed to determine whether localised repair, resurfacing or more extensive reconstruction is appropriate.
Yes. Tarmac and asphalt surfacing is available for residential driveways and suitable larger or commercial projects.
Yes. Alongside tarmac surfacing, Easy Group provides resin bound driveways, block paving and tar & chip surface dressing.
Where required, projects can include excavation, sub-base preparation, drainage, kerbing and edging before the final driveway surface is installed.
Yes. We provide free site surveys and no-obligation quotations for new driveways, resurfacing, repairs and suitable commercial surfacing projects.
Need a new tarmac driveway, resurfacing or repairs? Speak directly to Easy Group about your Weybridge project and arrange a free site survey and no-obligation quotation.
Professional resin bound driveway installation throughout Aylesbury and surrounding Buckinghamshire areas. Easy Group provides complete resin driveway solutions including site preparation, new driveway construction, suitable overlays, edging and drainage, with a wide choice of natural aggregate finishes available.
A resin bound driveway combines natural stone aggregate with specialist resin to create a smooth decorative surface that is completely bound together rather than remaining loose like traditional gravel.
Easy Group installs resin bound driveways throughout Aylesbury and the surrounding Buckinghamshire area for homeowners looking for a modern, practical alternative to tarmac, loose stone or conventional paving.
We can undertake completely new driveway construction as well as assess existing surfaces to determine whether they may be suitable for a resin overlay.
The existing ground, base construction, drainage, levels and edging are all considered before installation because the finished resin surface can only perform properly when the construction beneath it is appropriate.
Resin bound surfacing is produced by thoroughly mixing clean, selected natural aggregate with a specialist resin. The mixture is then laid and hand-finished over the prepared base to form a smooth, bound surface.
Because the stone is fully mixed into the resin, the finished driveway does not have the loose aggregate associated with a traditional gravel surface. It also produces a more consistent appearance across the area.
Resin bound and resin bonded surfacing are not the same system. With a resin bound driveway, the stone and resin are mixed together before the material is installed.
A resin bonded system instead involves applying aggregate onto a layer of resin. For residential driveway work where a smooth bound finish is wanted, resin bound surfacing is normally the system being referred to.
Different natural stones can be combined to produce lighter, darker, warmer or more neutral driveway colours. This allows the finished resin to be considered alongside the brickwork, render, walls, paving and landscaping around the property.
Contrasting block borders and edging can also be incorporated where appropriate to define the driveway and create a more individual entrance.
Resin bound surfacing is particularly attractive for homeowners who want the appearance of natural aggregate with a smoother, more controlled finished surface.
The best results depend on both the resin installation and the preparation beneath it, so the existing driveway and intended use are assessed before work begins.
Where the existing driveway is unsuitable or a completely new driveway is being created, the construction starts below the finished resin surface.
We inspect the existing ground, access, levels and proposed use of the driveway.
Unsuitable material is removed where required and an appropriate sub-base is prepared.
Finished levels, water management, kerbs and borders are considered before resin is installed.
The selected aggregate and resin are mixed, laid and professionally hand-finished.
One advantage associated with resin bound surfacing is that it can form part of a permeable driveway construction. However, this depends on the entire system beneath the finished resin layer.
A permeable resin surface laid over an impermeable base does not automatically make the whole driveway permeable, which is why the existing construction and drainage need to be considered during the survey.
Some existing driveways can provide a suitable base for a resin bound surface, particularly where the existing construction is stable and in good condition.
This can sometimes reduce the amount of reconstruction required, but an overlay should not be used simply to hide significant defects underneath.
A suitable tarmac surface may potentially provide a base for resin bound surfacing, but cracking, movement, contamination and drainage all need to be assessed before the driveway is considered suitable.
Where an existing driveway has widespread failure, repeated sinking, major cracking or an unsuitable underlying construction, additional preparation or complete reconstruction may provide a more appropriate long-term solution.
The site survey allows us to identify these issues before deciding how the new resin surface should be installed.
The right option depends on the condition of what is already there. We assess the existing surface rather than automatically recommending the same method for every property.
If the driveway is unstable, badly cracked, sinking or affected by underlying drainage or construction issues, rebuilding the affected area may be necessary before the new resin finish is installed.
Resin bound is an excellent option for many properties, but tarmac, block paving or tar & chip may be more appropriate depending on the driveway, appearance and expected use.
Tarmac provides a durable and practical surface for residential driveways, entrances and larger areas where regular vehicle traffic is expected.
New installations can include excavation, sub-base preparation, drainage and edging before the finished tarmac surface is laid.
Tarmac Driveways →Block paving offers considerable flexibility in colour, laying pattern and border design and can work well with both traditional and contemporary properties.
Individual paving blocks can also be replaced should localised repair be required in the future.
Block Paving →Tar and chip surface dressing creates a textured finish suitable for certain larger driveways, private roads, entrances and access areas.
The existing base needs to be suitable, so the site should be assessed before surface dressing is recommended.
Surface Dressing →Easy Group installs resin bound driveways throughout Aylesbury and surrounding Buckinghamshire areas. We can assess older driveways, replacement projects and completely new driveway installations.
If you are deciding between resin, tarmac or block paving, arrange a free survey and we can discuss the existing surface, preparation required and the different finishes available.
Yes. Easy Group provides resin bound driveway installation throughout Aylesbury and surrounding Buckinghamshire areas, including new driveway construction and suitable overlay projects.
Potentially. The existing driveway needs to be assessed first. A stable, suitable base may sometimes be retained, while cracking, movement or underlying failure can require additional preparation.
Resin bound surfacing can form part of a permeable driveway system when the complete base construction is designed appropriately. The finished resin layer alone does not make every existing driveway permeable.
There are numerous natural aggregate colours and blends available, allowing the finished driveway to be selected around the style and colouring of the property.
Yes. Where required, driveway construction can include excavation, sub-base preparation, drainage, edging and other associated groundwork before the resin surface is installed.
Yes. Alongside resin bound driveways, Easy Group provides tarmac, block paving and tar & chip surface dressing for suitable projects.
Yes. We provide free site surveys and no-obligation quotations so the existing surface, proposed design and preparation requirements can be assessed before pricing the project.
Planning a new resin bound driveway or replacing an older surface? Speak directly to Easy Group for a free site survey and no-obligation quotation in Aylesbury.
Professional resin bound driveway installation in High Wycombe and surrounding Buckinghamshire areas. Easy Group installs attractive, hard-wearing resin surfaces for driveways, entrances, paths and suitable commercial areas, together with tarmac, block paving and surface dressing options.
Resin bound surfacing has become a popular option for property owners looking for a modern alternative to traditional tarmac, paving or loose gravel. It combines selected natural stone aggregate with specialist resin to create a smooth, fully bound decorative surface.
Easy Group installs resin bound driveways throughout High Wycombe and the surrounding Buckinghamshire area, with a variety of aggregate colours and blends available to suit different properties.
The appearance of the finished resin is important, but so is the construction underneath it. Existing ground conditions, drainage, edging and the suitability of the base are assessed before installation is recommended.
We can provide completely new resin driveway construction or assess whether an existing suitable surface may be capable of supporting a resin bound overlay.
A resin bound driveway is created by thoroughly mixing selected stone aggregate with a specialist resin before the material is laid onto the prepared surface. Because the aggregate is mixed throughout the resin rather than simply scattered onto the surface, the finished driveway forms a smooth and consistent bound layer.
This is different from loose gravel, where individual stones remain free to move around, and is also different from resin bonded surfacing, where aggregate is applied onto a resin-coated surface.
One of the main attractions of resin bound surfacing is appearance. Natural aggregate is available in different sizes, colours and blends, allowing homeowners to select a finish that works with brick, render, stonework, walls, landscaping and other features around the property.
The result is a driveway with the visual character of natural aggregate but without the loose stones associated with a traditional gravel surface.
Although driveways are one of the most common applications, resin bound surfacing can also be used for suitable paths, entrance areas and other external surfaces where a smooth decorative finish is wanted.
The construction required beneath the resin will vary according to how the area is going to be used. A driveway carrying vehicles has different requirements from a pedestrian path, so each project needs to be assessed individually.
Resin bound surfacing combines decorative natural aggregate with a practical finished surface. Correct preparation remains essential, but when the system is appropriate for the site it provides several advantages for residential driveway projects.
We can show you different aggregate options during the quotation process and discuss how the surface will work alongside borders, walls, pathways and other features around your property.
A resin driveway does not have to look the same as every other installation. Aggregate selection, edging and surrounding details can all be used to create a finish suited to the property.
Choose from different natural stone colours and combinations to create either a lighter, darker or more traditional-looking finish.
Block paving or suitable edging can be used to define the resin surface and create contrast around the driveway or entrance.
Aggregate and border choices can be considered alongside the property's brickwork, walls, paving and surrounding landscaping.
A resin surface should not simply be installed over an unsuitable driveway. The condition and stability of the surface underneath it are important to the long-term performance of the installation.
During the survey we inspect the existing driveway, levels, drainage and construction before deciding whether an overlay is appropriate or whether additional preparation is needed.
In some circumstances, yes. An existing tarmac or other suitable stable surface may provide a base for resin bound surfacing, but it needs to be in an appropriate condition.
If the existing driveway is badly cracked, unstable, moving or affected by drainage problems, simply covering the surface can leave the underlying problem unresolved.
For this reason we inspect the existing driveway before deciding whether an overlay is appropriate. Where additional preparation or reconstruction is needed, this can be discussed as part of the proposed work.
Resin bound systems can provide a permeable surface when installed as part of a suitable permeable construction. However, permeability depends on the complete driveway system beneath the resin rather than the resin finish alone.
Drainage and water management are therefore considered during the survey, particularly where an existing impermeable surface is already present.
Resin bound is the main focus of this service, but it is not always the most appropriate surface for every property. We also install tarmac, block paving and tar & chip surface dressing.
Tarmac provides a smooth and hard-wearing surface suitable for many residential driveways, entrances and larger parking areas.
New installations can include excavation, sub-base preparation, edging and drainage before the finished tarmac surface is laid.
Tarmac Driveways →Block paving offers a wide selection of colours, laying patterns and decorative borders and can suit both traditional and contemporary properties.
Paving can also be combined with resin or tarmac to provide contrasting borders and entrance details.
Block Paving →Tar and chip provides a textured natural-looking surface that can work particularly well for suitable larger driveways, private entrances and access routes.
The condition of the existing base is assessed before surface dressing is recommended.
Surface Dressing →There is no single driveway surface that is right for every site. The existing construction, appearance, intended use and budget should all be considered before choosing a finish.
Resin bound is particularly attractive where you want a smooth, decorative driveway with a choice of natural aggregate finishes and no loose gravel across the surface.
Tarmac can be preferable where practicality and larger hard-wearing areas are the priority, while block paving may be better where a highly defined paving pattern or easily replaceable individual units are wanted.
Easy Group provides resin bound driveway installation throughout High Wycombe and surrounding Buckinghamshire areas. We can survey existing driveways as well as completely new areas and explain the preparation required for the proposed surface.
If you are comparing resin bound, tarmac or block paving for your property, we can discuss the different options and provide a no-obligation quotation.
Yes. Easy Group installs resin bound driveway surfacing throughout High Wycombe and surrounding Buckinghamshire areas, with different aggregate colours and blends available.
Potentially. The existing tarmac needs to be assessed first to determine whether it is sufficiently stable and suitable. Significant cracking, movement or drainage problems may require additional preparation.
Resin bound surfacing can form part of a permeable driveway system when installed over a suitable permeable construction. The complete base design needs to be considered rather than assuming the finished resin layer alone makes every driveway permeable.
Resin bound surfacing is available in a variety of natural aggregate colours and blends. The available options can be discussed when the driveway is surveyed and the preferred appearance established.
Yes. Alongside resin bound surfacing we provide tarmac driveways, block paving and tar & chip surface dressing for suitable properties and projects.
Yes. We provide free site surveys and no-obligation quotations so the existing driveway, required preparation and preferred finish can be considered before the project is priced.
Thinking about a resin bound driveway? Speak directly to Easy Group about your property, existing surface and preferred finish. Free site surveys and no-obligation quotations are available.